Find out how to Assemble the Ender 3 V2 3D Printer: A Full Walkthrough

Ender 3 V2 is an upgraded model of the favored Ender 3 Professional 3D printer. It presents a number of enhancements over the unique Ender 3, together with a bigger construct quantity and a extra highly effective major board. It additionally has improved movement management and a resume print operate that permits the printer to choose up the place it left off after an influence outage.


Assembling the Ender 3 V2 is an easy course of that requires minimal instruments and no prior 3D printing expertise. To start out the meeting course of, you may observe these easy steps.


Step 1: Unbox the 3D Printer

Ender 3 v2 components in a box

Fastidiously take away the packaging supplies and guarantee you may have all of the components and items that got here with the printer. It’s best to have:

  • Energy provide
  • Mainboard
  • Chassis module
  • Profiles
  • Filament holder
  • Frames
  • Switches
  • Extruder
  • LCD show
  • Management knob
  • Screws
  • Mattress leveling knobs
  • A set of instruments

All set? Let’s proceed.

Step 2: Putting in the Z-Axis Change and Z-Axis Profile

Get the restrict sensor, set up it to the z-axis profile, and lock them utilizing the 4 M5X45 screws and the spring washers to make sure that it’s tightly mounted.

Take the z-axis profile and fasten it to your 3D printer. Be sure that the profile and the restrict change sensor are on the identical peak.

Installing the Z-axis Switch and Z-axis profile on Ender 3 V2

Take the second z-axis profile and lock it to the right-hand part of the printer utilizing the 2 m4X18 screws.

Step 3: Set up the Z-Axis Motor Package

A hand holding a Z-axis motor

The Z-axis motor equipment contains the Z-axis motor and a skinny white metallic rod. To start out assembling, loosen the screws on the motor to create house for the motor rod to move via. Then insert the metallic rod and tighten it utilizing the screws proven under.

Installing the Z-axis motor in ender 3 v2

Be sure that you align the Z-axis motor equipment with the Z-axis profile.

Step 4: Set up the Pneumatic Connector to the XE Package

Take the pneumatic connector and tighten it to the XE utilizing an open-end wrench. Then, use the 2 M4X16 screws to suit the XE shaft to the X-axis profile, as proven under.

A hand holding pneumatic joints for ender 3v2

Subsequent, insert the timing belt via the XE shaft.

A hand inserting the timing belt into the XE shaft

Simply be certain that you insert it utilizing the precise path.

Step 5: Assembling the Nozzle Package

Take the already put in pneumatic connector and XE equipment, insert the nozzle from certainly one of its ends, and transfer it virtually in the direction of the tip.

A hand placing the nozzle into the pneumatic connector

Subsequent, take the Z-axis passive block and fasten it to the X-axis profile.

A hand inserting the z-axis to the passive block

Use M4X16 screws with spring washers to lock and tighten the Z-axis passive block.

Step 6: Set up X-Axis Tightener

Begin by inserting the timing belt into the tightening block after which put each of them into the X-axis tightener.

A hand placing the tightening belt to the printer

Tighten the plastic thumb nut and use the M4X16 screw to tighten them to the Z-axis passive block.

A hand tightening the plastic thumb nut

As soon as executed, take the put in z-axis transferring module to your printer. Modify the tightness of the X and Y axis to make sure that it’s transferring easily.

Tightening the screws on the moving z-axis module

Simply be certain that it doesn’t fall off by itself.

Step 7: Set up the Gantry Profile and Display

Take the 4 M5x25 head cap screws with washers to repair the gantry to the highest of the profiles.

Installing the gantry on the upper section of the profile

Subsequent, take the display and set up it in your 3D printer. Use a hexagon socket wrench to lock the screws to the show module.

The screen attached to the ender 3 v2

Simply ensure that the display is aligned appropriately with the entrance profile.

Subsequent, take the filament spool holder and set up it to the higher profile of the gantry, as proven under.

Placing the filament holder on the 3D printer

The filament spool holder helps you be organized throughout 3D printing.

Step 8: Join the Bowden Tube and Rotary Knob to the Extruder

As proven under, insert the Bowden tube into the extruder till it goes no additional.

Inserting the white tube to the extruder

Subsequent, take the rotary knob to the highest of the extruder motor shaft. Push the covers of the profile on each side to the highest.

Inserting the rotary knob on top of the extruder

Step 9: Set up Electrical Connections

Take the X, E, and Z-axis stepper motors and join them primarily based on the yellow labels on the connectors.

Inserting the electrical connectors to the 3D printer

Subsequent, join the X and Z axis switches primarily based on the yellow labels.

Installing the X and Z limit switches

Be sure that the plugs and sockets are appropriately aligned. As soon as executed, set the right voltage.

Setting the correct voltage on ender 3 v2

Subsequent, plug within the energy supply.

Unplugging the power cord from the power supply of Ender 3 V2

Activate the change, and you need to see the display turning on.

Step 10: Degree the Mattress

Sliding a white piece of paper below the nozzle on the 3D printer bed

On the display part, go to Print > Auto house. You will notice the mattress and the pneumatic connector equipment transferring. As soon as it stops transferring, choose Disable Stepper on the display.

Subsequent, you have to to make use of a chunk of paper to degree the 3D printer mattress. You’ll be able to insert the paper between the mattress and the nozzle. Modify the nuts under the mattress in every nook of your printer till the paper is scratched barely.

Subsequent, go to Put together > Preheat PLA and wait till the temperature matches the one proven on the display. You’ll be able to then insert the cardboard together with your G-code.

Step 11: Loading the Filament

Red PLA filament

When you assemble all of the components, you have to load the filament appropriately into your Ender 3 V2 3D Printer. There are completely different 3D printer filaments out there, and you should purchase the one particular to your nozzle. Earlier than loading your filament, put together it correctly. Take the tip of the filament and lower it at a 45-degree angle.

Subsequent, insert the filament and guarantee it goes into the precise gap. Push it in till it stops, and ensure that it’s safe and never popping out. Use the knob to maneuver the filament till you now not see it transferring.

Now that you’ve got fed the filament, it’s time to test the outcomes. Be sure that the filament comes out of the nozzle appropriately and extrudes appropriately. If every little thing appears good, you’re prepared to begin 3D printing!

Get pleasure from a Completely Assembled Ender 3 V2

Assembling the Ender 3 V2 is a comparatively easy course of you could end in lower than an hour as many of the components are assembled already, in contrast to different 3D printers like Anet A8, the place customers must assemble every little thing from the bottom up.

Simply take your time and observe the directions rigorously. There are a number of small components, and it may be simple to overlook a step or two. Use the right screws in every part, and be certain that the voltage used is true, because the fallacious voltage can have an effect on the ability provide.

See also  Safe Your Dwelling Assistant Set up With a Free SSL Certificates